xAD / nIGHTFALL    A few months ago, i printed 3D the MOS 6581 LightBox but out of laziness i hadn’t yet installed a home automation LED strip. I’ll leave you with the photos, there’s no point in describing what seems obvious :D Gallery:

xAD / nIGHTFALL    The print of the case for the Commodore Floppy Drive 1541-II Harlequin version has been finished with a total print time of 23 hours (slow print mode), including filament drying. These are the changes made to the original designs: The feet on the bottom of the case have been removed to avoid the...

xAD / nIGHTFALL    Andrea Ottaviani (aotta) has released a couple of firmware updates for the Flash Multicarts based on the Pico Clone (Purple) PiRTO II v. 1.05b7 (Intellivision flash multicart) Changelog: Added Arduino IDE version, new environment left more ram space and let games until 180kb run. Fixed Time Pilot....

xAD / nIGHTFALL    I needed a volume control lever for one of my NMS-1515 recorders. I couldn’t find a ready-made STL, so i designed it myself. I’ve published the STL on major 3D object sites: thingiverse.com, makerworld.com, printables.com, makeronline.com and many others. 3D printing settings: Printer Used...

xAD / nIGHTFALL    Yet another Chinese product, but for 13 it was worth trying this crazy piece of crap. It works well for the price, but the problem, as I suspected, is the focal length, which is practically zero. The protective ring MUST be placed on the object, so if we need to identify SMD components, such as [.....

xAD / nIGHTFALL    I made some modifications to the case for A. Ottaviani PiRTO-II cartridge. I modified the case redesigned by Eskimo, which is essentially a MIX with some improvements to the A. Ottaviani case. Not satisfied, i created another MIX by modifying the following: Removed the tab just below the female USB...

xAD / nIGHTFALL    I tried for the first time this circuit to mod the Atari 2600 to have a Composite video output and S-Video instead of RF. I must say that this modification really amazed me, and i’ve made several others, all very similar for the Atari 2600. The signal is clean (crystal clear) with both outputs ...

xAD / nIGHTFALL    3D printing and replacement of the pulverized gears on the Philips NMS-1515 (D6450) cassette deck. I decided to print the gears because are available for download on the Thingiverse website. I modified the hole diameter which was too narrow and added a fastening system for the two fast-forward...

xAD / nIGHTFALL    I received the Atari 2600 Dark Vader version for repair. The problem was a black screen and since it had happened several times before i was sure the 6504 CPU was dead but in this case is the TIA dead. I also made a composite video mod by removing the RF modulator and a couple [...]

xAD / nIGHTFALL    Andrea Ottaviani (aotta) has released a couple of firmware updates for the Flash Multicarts based on the Pico Clone (Purple) PiRTO II (Intellivision flash multicart) Changelog: v1.04: Bug fixed Missile Dominatino (added support for both RAM8 and RAM16) PiCOLECO (Colecovision flash multicart)...

xAD / nIGHTFALL    NEW TAG: C64 BIG GAME PACK Some new games or tools (Cracked Trained or Unrealeased) for Commodore 64 have been released from your favorites groups. Titles: Space Invaders 2 Mad Moggy 3 Krakout Yellow Banana Box 512 1HD (Excess, Hokuto Force) Space Invaders 2 Nigel Mansell’s World Championship...

xAD / nIGHTFALL    I modified the original Atari design to have all the components needed for printing on a single plate, having a multicolor printer, it seemed absurd to print all the components separately and then glue or fit them together. I made the two Texas Instruments TI-99 4A and MOS 6581 lightboxes myself....

xAD / nIGHTFALL    This repair was commissioned by a long-time contact of mine; it involves the now rare M82 Kiosk System PAL version from Nintendo. The Nintendo Entertainment System model no. M82 (NES M82), also known as simply the M82 was an in-store demo unit of the Nintendo Entertainment System capable of holding...

xAD / nIGHTFALL    Another Commodore A3640 Gal upgrade to 3.2 Works that have been done: Upgrading GAL (U204 & U209) Gallery of the work done: Download GAL files from here: https: www.amigawiki.org doku.php?id de:parts:pld download

xAD / nIGHTFALL    Atari 2600 JR PAL Composite Video Mod for my friend Charlie. As you can see from the photos i used the RF output hole by removing the female connector and printing with the a 3D printer an adapter that fits perfectly where inside there is a 3.5mm JACK for the composite VIDEO and AUDIO output. [...]